A 100 ml HDPE shampoo bottle is a common, high-intent spec for brands launching or scaling a shampoo product. This page covers the material fit, the right closure and neck finish, and how to source it direct from a factory with low MOQ and custom decoration.
Bottles from our catalogue — 100 ml HDPE shampoo bottles.
Why specify a 100 ml HDPE shampoo bottle
At 100 ml, this format balances shelf presence and fill cost for a shampoo product. HDPE is naturally opaque and slightly flexible, which suits a shampoo where chemical resistance and a practical look matter. We tool this capacity across our HDPE range so the shape, neck and closure are proven before you order.
HDPE suitability for shampoo
HDPE fits: shampoos, body wash, conditioners, creams, detergents and any acidic or alkaline formula. Avoid it for: when a clear, premium look is required (it is opaque by nature). For export, note that HDPE recycles widely; keep colours light for best reclamation. If HDPE is not the right call, the usual alternatives are PET (if clear look needed) and PP (if hot-fill or hinge needed).
Closure and neck finish
A shampoo bottle at this size normally takes a lotion pump (28/410). The neck finish is 18/415 or 20/410, which means any standard 18/415 or 20/410 closure fits — so you can source the pump or cap separately and still seat it on our bottle. We confirm the neck at quotation so nothing is stranded.
Customization, MOQ and lead time
Stock HDPE bottles in this capacity start around 5,000 pcs; custom colour or plating begins near 10,000 pcs. Add silk-screen or hot-stamp decoration from a signed proof. Stock + simple print typically runs a few weeks; we bridge smaller first runs where volume is still proving out.
| Option | Why pick it | Trade-off |
|---|---|---|
| HDPE | shampoos, body wash, conditioners, creams, detergents and any acidic or alkaline formula | See avoids |
| PET | PET (if clear look needed) | Different look/property |
| PP | PP (if hot-fill or hinge needed) | Different look/property |
Related: cosmetic bottles.
Compliance note: Every bottle ships with the paperwork your market needs. Shijin is ISO 9001:2015 certified and can supply FDA / EU 10/2011 compliance documents on request, so your order clears customs without delay.
Typical specifications buyers request
| Model | Material | Capacity | Neck |
|---|---|---|---|
| Wholesale 80ml HDPE Cosmetic Bottl | HDPE | 80 ml | Custom |
| 100ml HDPE Cosmetic Bottle – Custo | HDPE | 100 ml | Custom |
| SJE1725 | PE | 85 ml | 28 mm |
| 120ml PE Cosmetic Bottle for Serum | PE | 120 ml | 20 mm |
The 100 ml HDPE body is one of the shapes we run most often for this application. The table shows representative stock molds — most projects start from one of these and tune neck, colour and decoration.
Starting from a stock mold means a real, fill-tested bottle in days rather than waiting on a custom tool, which is usually the fastest way to de-risk a new SKU.
How we make and inspect the body
The bottle is blow-molded on our lines, then weighed and visually checked for flash, neck roundness and wall uniformity. Decoration (silk-screen, hot-stamp or label) is applied after the body passes inspection, and a final leak-spot check goes on filled samples.
Because the tool is in-house, sampling lead time is short — typically 3–10 days from drawing to first article — and repeats stay consistent because the same mold and resin are used every run.
Sizing the closure to this body
A 100 ml body needs a closure matched to its neck and its fill weight. Lighter, low-viscosity products suit a narrow dropper or mist; heavier or thicker fills want a wider neck and a pump or trigger that primes cleanly.
Tell us the closure you plan to use at sampling so we can confirm the neck and the sealing band before bulk — a mismatch only shows up once the line is running, and that is the expensive place to find it.
Next step
If this body looks close to what you need, send us your fill volume and planned closure and we will confirm the neck and the sealing band on a sample first.
Stock molds in this size family usually sample within 3–10 days, so you can prove the bottle before committing to volume.
Frequently Asked Questions
Can you make a 100 ml HDPE shampoo bottle?
Yes — we tool 100 ml HDPE bottles and can match the neck finish (18/415 or 20/410) to your closure.
What closure fits a 100 ml HDPE shampoo bottle?
Typically a lotion pump (28/410); the 18/415 or 20/410 neck accepts standard closures of that type.
What is the MOQ for a 100 ml HDPE bottle?
Stock bottles from about 5,000 pcs; custom colour or plating from around 10,000 pcs.
Is HDPE right for my shampoo formula?
HDPE fits shampoos, body wash, conditioners, creams, detergents and any acidic or alkaline formula. If your formula is when a clear, premium look is required (it is opaque by nature), consider PET (if clear look needed).
Can I custom-colour a 100 ml HDPE bottle?
Yes — via masterbatch, matched to your Pantone or sample, from a signed proof.
Explore our full bottle catalog or contact our team for custom tooling and low-MOQ production runs.
Related Shampoo Bottles
1000ml PE Plastic Bottle 28mm Neck 85g for Lotion, Shampoo & Detergent
PE · 1000 ml
200ml PET Round Bottle for Shampoo & Conditioner – 24mm Neck, 26g
PET · 200 ml
250ml PET Round Bottle for Conditioner & Shampoo – 24mm Neck, 28g
PET · 250 ml
300ml PET Round Bottle for Shampoo & Body Wash – 24mm Neck, 32g
PET · 300 ml