Bottles, jars and dispensers — engineered to your brand.
Eight product families across PET, HDPE, PP, PETG and PCR. Stock molds for fast sampling, or a fully private tool designed around your idea.
Eight families, one partner
From a 10 ml serum dropper to a 1.2 L detergent bottle, every product below can be produced in our stock molds or re-designed as a private tool — with in-house printing, labeling and finishing.
Plastic Cosmetic Bottles
Lotion pumps, serum bottles and treatment packaging in PET, PETG and PE. High clarity, precise necks, custom color and surface finishing.
Plastic Bath & Shower Bottles
Shampoo, conditioner and body-wash bottles built for the shower shelf — durable HDPE/PP, comfortable grip, leak-tested pumps.
Daily Cleaning Bottles
Detergent, dish-wash and multi-surface bottles engineered for chemical resistance and consistent trigger performance.
Hand Sanitizer Bottles
Gel and liquid sanitizer packaging with pump, flip-top or spray closures — travel to counter-top sizes.
Plastic Jars & Cream Pots
Wide-mouth jars for creams, scrubs and balms. Single- or double-wall, with inner liners and tamper-evident lids.
Dip / Squeeze Bottles
Soft-touch squeeze bottles for lotions, sauces and gels with disc-top or nozzle dispensing and precise dosing.
Foam Pump Bottles
Foaming dispensers for facial cleansers and hand soap — consistent rich foam, refill-friendly designs.
Dropper Bottles
Precision dropper bottles for serums and essential oils. Glass-like PET/PETG clarity with graduated pipettes.
Get the full catalog by capacity
One click to a printable, image-rich PDF of our in-stock bottles & closures — split by capacity so you can share the right segment with your team. (ISO 9001 · FDA · Food Grade · EU 10/2011)
Every stock mould, grouped by resin
1,108 stock moulds across four resin families. Open a material to see every bottle we hold tooling for — capacity, neck finish, weight and compatible closures listed on each page.
Glass-like clarity for serums, toners and lotions where the fill is on show.
Squeeze-friendly and chemical-resistant for lotion, shampoo, detergent and home care.
Stiff, opaque and tough — for aggressive fills and bulk packs.
Thick-wall clarity and impact strength where standard PET falls short.
Featured products
1000ml PE Bath Bottle for Bulk Refill & Family Size – 38mm Neck, 75g
PE · 1000 ml
1000ml PE Plastic Bottle 28mm Neck 85g for Lotion, Shampoo & Detergent
PE · 1000 ml
1000ml PE Plastic Detergent Bottle with Handle
PE · 1000 ml
1000ml PET Bath Bottle
PET · 1000 ml
1000ml Rectangular PE Plastic Bottle – 28mm Neck
PE · 1000 ml
100ml HDPE Cosmetic Bottle
PE · 100 ml
100ml HDPE Cosmetic Bottle – Custom Logo
HDPE · 100 ml
100ml PE Cosmetic Bottle for Facial Cleanser & Lotion – 20mm Neck, 18g
PE · 100 ml
100ml PE Soft Touch Cosmetic Bottle – 24mm Neck
PE · 100 ml
100ml PET Cosmetic Bottle with Dropper & Mist Sprayer (28/410 Neck)
PET · 100 ml
100ml PET Cosmetic Bottle with Lotion Pump & Disc-Top (24/410 Neck)
PET · 100 ml
100ml PET Cosmetic Bottle with Roll-on Applicator (24/410 Neck)
PET · 100 ml
100ml PET Flat Bottle for Lotion & Treatment – 24mm Neck, 18g
PET · 100 ml
100ml PET Foam Pump Bottle
PE · 100 ml
100ml PET PET Cosmetic Bottle for Facial Toner Packaging
PET · 100 ml
100ml PET Round Bottle for Serum & Lotion – 20mm Neck, 18g
PET · 100 ml
100ml PET Round Bottle for Serum & Sample – 20mm Neck, 18g
PET · 100 ml
100ml PET Spray Bottle for Facial Mist & Toner – 20mm Neck, 18g
PET · 100 ml
100ml PET Square Bottle for Lotion & Treatment – 24mm Neck, 18g
PET · 100 ml
100ml PET Transparent Bottle 24mm Neck 16g for Serum, Essential Oil & Toner
PET · 100 ml
100ml PET Treatment Bottle for Serum & Lotion – 20mm Neck, 17g
PET · 100 ml
100ml Small Cylindrical PE Bottle – 20mm Neck
PE · 100 ml
118ml PET Cosmetic Bottle – Custom Logo
PET · 118 ml
1200ml PE Bath Bottle with Custom Logo
PE · 1200 ml
The right resin for the job
We help you choose the material that protects your formula and fits your budget — including GRS-certified PCR for brands with sustainability commitments.
High clarity (up to 95%), excellent gas barrier, pressure-resistant.
Best for: transparent cosmetic & beverage-grade bottles. Not for hot-fill or strong acids/alkalis.
Outstanding chemical resistance to strong acids and alkalis; tough and impact-safe.
Best for: detergents, cleaners, shampoos. Slightly porous — not for volatiles.
Heat-resistant, impact-resistant, acid/alkali tolerant.
Best for: caps, pumps, sprayers and hot-fill jars.
Premium clarity with better chemical resistance than PET.
Best for: high-end serums & treatment lines. Higher material cost.
Recycled PET/PE resin for a lower carbon footprint.
Best for: EU/US brands with sustainability targets. GRS-certified supply.
Make it unmistakably yours
PET/PETG can be run crystal clear or high-gloss; PE/PP can be natural, solid, pearl, matte-frosted or soft-touch. Every finish below is produced in-house so color and texture stay consistent batch to batch.
How to shortlist a bottle without a second sampling round
Most programmes lose time in the same place: a bottle is approved, then the closure does not fit, and the whole thing goes back for another round. The way to avoid it is to fix the neck finish before the bottle shape is drawn. The finishes we run most are 18/410, 20/410, 24/410 and 28/410, and each one defines which pumps, sprayers, droppers and caps you can use — for the life of the product, not just for this order.
The second decision is material, and it should follow the formula rather than the mood board. PET gives clarity and good barrier for most cosmetic and personal-care products; PETG steps up when the wall is thick or the formula is more aggressive; PE and HDPE are the honest answer for anything with strong acids, alkalis or solvents. A supplier who asks what is going into the bottle before quoting is asking the right question.
The third is decoration, and it interacts with the first two. Silk screen, hot stamping, spray coating and labelling all run in-house, but the artwork has to suit the panel and the print has to suit the material — polyethylene needs surface treatment before it will hold ink at all. Settling all three at the start is what turns a two-round sampling process into a one-round one. Keeping all three on one site is what makes it possible — that is the logic behind our one-stop packaging service.
What to send us so the first quote is the real quote
Four pieces of information turn an estimate into a quote: bottle size, material, neck finish and how the product is dispensed. If there is a pump or sprayer involved, add the viscosity — output is matched to thickness, and a sprayer that mists beautifully with water can stream with a slightly heavier product. Missing viscosity is the single most common reason a first sample disappoints.
Minimums are 5,000 pcs for white, black and natural closures and accessories and 10,000 pcs for custom colours, and more than 2,000 moulds are already in the library so most projects start with no tooling charge. Samples on a stock mould are typically ready in 3–10 days, and colour is matched in-house and confirmed on a physical sample before production begins.
It also helps to tell us the sales channel. A bottle going to a retail shelf and the same bottle going in a parcel need different things — the parcel version cares about top-load strength and closure locks, the shelf version about print and presence. That one sentence changes what we recommend, and it costs nothing to include.
Branding done under one roof
Silk screen, labeling and hot stamping run in-house; specialty processes are tested and signed off before mass production so there are no surprises. Decoration is one leg of our one-stop packaging programme — mould making, blowing and closure injection sit on the same site.
Note: PE bottles receive flame + water-hanging tests before printing to prevent ink peeling. Electroplating, hot-stamp and water-transfer are always sample-approved and signed before running — we never over-promise a finish we haven’t proven on your bottle.
Stock-mold samples ship fast; private molds follow after tooling sign-off.
Small trial runs available (a start-up fee applies under 10k pcs). Accessories from 5,000 pcs in white/black/natural.
Every design is validated at 0.6–0.8 MPa air pressure and a 1–1.2 m drop before it ships.
Have a bottle in mind? Let’s make it.
Send us your capacity, material and quantity — our engineering team replies within one business day with a quote and 3D-ready options.