A 200 ml PET mist bottle is a common, high-intent spec for brands launching or scaling a mist product. This page covers the material fit, the right closure and neck finish, and how to source it direct from a factory with low MOQ and custom decoration.
Bottles from our catalogue — 200 ml PET bottles for mist and spray formats.
Why specify a 200 ml PET mist bottle
At 200 ml, this format balances shelf presence and fill cost for a mist product. PET is clear and rigid, which suits a mist where clarity and a premium feel matter. We tool this capacity across our PET range so the shape, neck and closure are proven before you order.
PET suitability for mist
PET fits: leave-on, low-active formulas: serums, toners, facial mists, premium water-style bottles. Avoid it for: strong acids, high alkalis and essential-oil-heavy blends (stress-crack risk). For export, note that clear PET is one of the most recycled plastics. If PET is not the right call, the usual alternatives are HDPE (if opaque / chemical-resistant needed) and PETG (if clarity + tougher formula).
Closure and neck finish
A mist bottle at this size normally takes a fine mist spray. The neck finish is 24/410, which means any standard 24/410 closure fits — so you can source the pump or cap separately and still seat it on our bottle. We confirm the neck at quotation so nothing is stranded.
Customization, MOQ and lead time
Stock PET bottles in this capacity start around 5,000 pcs; custom colour or plating begins near 10,000 pcs. Add silk-screen or hot-stamp decoration from a signed proof. Stock + simple print typically runs a few weeks; we bridge smaller first runs where volume is still proving out.
| Option | Why pick it | Trade-off |
|---|---|---|
| PET | leave-on, low-active formulas | See avoids |
| HDPE | HDPE (if opaque / chemical-resistant needed) | Different look/property |
| PETG | PETG (if clarity + tougher formula) | Different look/property |
Related: cosmetic bottles.
Compliance note: Every bottle ships with the paperwork your market needs. Shijin is ISO 9001:2015 certified and can supply FDA / EU 10/2011 compliance documents on request, so your order clears customs without delay.
Typical specifications buyers request
| Model | Material | Capacity | Neck |
|---|---|---|---|
| SJT0128 | PET | 128 ml | 28 mm |
| SJT0242 | PET | 242 ml | Custom |
| SJE1792 | PE | 200 ml | Custom |
| SJE-1771 | PE | 228 ml | Custom |
The 200 ml PET body is one of the shapes we run most often for this application. The table shows representative stock molds — most projects start from one of these and tune neck, colour and decoration.
Starting from a stock mold means a real, fill-tested bottle in days rather than waiting on a custom tool, which is usually the fastest way to de-risk a new SKU.
How we make and inspect the body
The bottle is blow-molded on our lines, then weighed and visually checked for flash, neck roundness and wall uniformity. Decoration (silk-screen, hot-stamp or label) is applied after the body passes inspection, and a final leak-spot check goes on filled samples.
Because the tool is in-house, sampling lead time is short — typically 3–10 days from drawing to first article — and repeats stay consistent because the same mold and resin are used every run.
Sizing the closure to this body
A 200 ml body needs a closure matched to its neck and its fill weight. Lighter, low-viscosity products suit a narrow dropper or mist; heavier or thicker fills want a wider neck and a pump or trigger that primes cleanly.
Tell us the closure you plan to use at sampling so we can confirm the neck and the sealing band before bulk — a mismatch only shows up once the line is running, and that is the expensive place to find it.
Next step
If this body looks close to what you need, send us your fill volume and planned closure and we will confirm the neck and the sealing band on a sample first.
Stock molds in this size family usually sample within 3–10 days, so you can prove the bottle before committing to volume.
Frequently Asked Questions
Can you make a 200 ml PET mist bottle?
Yes — we tool 200 ml PET bottles and can match the neck finish (24/410) to your closure.
What closure fits a 200 ml PET mist bottle?
Typically a fine mist spray; the 24/410 neck accepts standard closures of that type.
What is the MOQ for a 200 ml PET bottle?
Stock bottles from about 5,000 pcs; custom colour or plating from around 10,000 pcs.
Is PET right for my mist formula?
PET fits leave-on, low-active formulas: serums, toners, facial mists, premium water-style bottles. If your formula is strong acids, high alkalis and essential-oil-heavy blends (stress-crack risk), consider HDPE (if opaque / chemical-resistant needed).
Can I custom-colour a 200 ml PET bottle?
Yes — via masterbatch, matched to your Pantone or sample, from a signed proof.
Explore our full bottle catalog or contact our team for custom tooling and low-MOQ production runs.
Related PET Spray Bottles
150ml PET Plant Misting Empty Spray Bottle with 20mm Neck 30g
PET · 150 ml
200ml PET Perfume Empty Spray Bottle with 20mm Neck 30g
PET · 200 ml
250ml PET Body Spray Empty Spray Bottle with 20mm Neck 30g
PET · 250 ml
250ml PET Hair Care Empty Spray Bottle with 20mm Neck 30g
PET · 250 ml