A 50 ml PETG cream bottle is a common, high-intent spec for brands launching or scaling a cream product. This page covers the material fit, the right closure and neck finish, and how to source it direct from a factory with low MOQ and custom decoration.
Bottles from our catalogue — 50 ml cream bottles in PETG and PET.
/SJE1683-100(PETG)-300x200.jpg)
Why specify a 50 ml PETG cream bottle
At 50 ml, this format balances shelf presence and fill cost for a cream product. PETG is clear like PET but tougher, which suits a cream where clarity and a premium feel matter. We tool this capacity across our PETG range so the shape, neck and closure are proven before you order.
PETG suitability for cream
PETG fits: premium clear jars and active-treatment bottles that contact stronger formulas. Avoid it for: when cost is the priority (PETG is pricier than PET). For export, note that recycles, though less universally than clear PET. If PETG is not the right call, the usual alternatives are PET (lower cost, clear) and HDPE (opaque, cheaper).
Closure and neck finish
A cream bottle at this size normally takes a lotion pump. The neck finish is 18/415 or 20/410, which means any standard 18/415 or 20/410 closure fits — so you can source the pump or cap separately and still seat it on our bottle. We confirm the neck at quotation so nothing is stranded.
Customization, MOQ and lead time
Stock PETG bottles in this capacity start around 5,000 pcs; custom colour or plating begins near 10,000 pcs. Add silk-screen or hot-stamp decoration from a signed proof. Stock + simple print typically runs a few weeks; we bridge smaller first runs where volume is still proving out.
| Option | Why pick it | Trade-off |
|---|---|---|
| PETG | premium clear jars and active-treatment bottles that contact stronger formulas | Pricier |
| PET | PET (lower cost, clear) | Different look/property |
| HDPE | HDPE (opaque, cheaper) | Different look/property |
Related: cosmetic bottles.
Compliance note: Every bottle ships with the paperwork your market needs. Shijin is ISO 9001:2015 certified and can supply FDA / EU 10/2011 compliance documents on request, so your order clears customs without delay.
What good execution looks like
A solid process starts with the tool and ends with a measured, repeatable part. We cut the mold in-house, validate the first article against the drawing, and hold wall and weight within a tolerance band so every bottle off the line seats its closure the same way.
Decoration is where most programmes slip — silk-screen and hot-stamp need a clean, flat landing zone and a cure check, or the print rubs off in transit. We run that check before bulk printing.
The point of the discipline is consistency: a buyer should be able to reorder six months later and receive a bottle that matches the first one part-for-part.
Red flags to avoid
Watch for suppliers who quote a closure size they cannot actually seat, who skip the first-article sign-off, or who cannot show the resin certificate for the market you ship to. Each of those turns into a line-down event once the order is in production.
How we support your first run
Because the tool is in-house, sampling lead time is typically 3–10 days from drawing to first article. We hold the sample against the drawing, confirm wall and weight, then scale.
For a custom programme that sequence means you validate before you commit — and because the same mold and resin are used on every repeat, later orders match the approved first article.
The takeaway for buyers
Treat the first-article sample as the contract. If it seats, seals and survives the drop test, hold every later order to it, and the programme stays consistent without re-engineering.
That single discipline removes most of the risk buyers associate with offshore tooling.
Frequently Asked Questions
Can you make a 50 ml PETG cream bottle?
Yes — we tool 50 ml PETG bottles and can match the neck finish (18/415 or 20/410) to your closure.
What closure fits a 50 ml PETG cream bottle?
Typically a lotion pump; the 18/415 or 20/410 neck accepts standard closures of that type.
What is the MOQ for a 50 ml PETG bottle?
Stock bottles from about 5,000 pcs; custom colour or plating from around 10,000 pcs.
Is PETG right for my cream formula?
PETG fits premium clear jars and active-treatment bottles that contact stronger formulas. If your formula is when cost is the priority (PETG is pricier than PET), consider PET (lower cost, clear).
Can I custom-colour a 50 ml PETG bottle?
Yes — via masterbatch, matched to your Pantone or sample, from a signed proof.
Explore our full bottle catalog or contact our team for custom tooling and low-MOQ production runs.
Related Cosmetic Bottles
100ml HDPE Cosmetic Bottle
PE · 100 ml
100ml HDPE Cosmetic Bottle – Custom Logo
HDPE · 100 ml
100ml PE Cosmetic Bottle for Facial Cleanser & Lotion – 20mm Neck, 18g
PE · 100 ml
100ml PE Soft Touch Cosmetic Bottle – 24mm Neck
PE · 100 ml