Cosmetic 100ml Small Cylindrical PE Bottle – 20mm Neck
Plastic Cosmetic Bottles
Compact 100ml small cylindrical PE bottle with 20mm narrow neck. Ultra-lightweight at only 12g. Ideal for essential oils, serums, treatment essences, travel-size toiletries, and sample/promotional sizes. Premium soft-touch finish available.
The PE construction is flexible and impact-resistant. Its compact size suits travel formats, samples and concentrated serums.
Built to spec, ready to brand
Every dimension in the record below belongs to this model. Body diameter, total height and wall thickness are confirmed against a physical pre-production sample before mass production runs.
Share your formula and fill volume and we will advise the safest material and neck combination for it.
- Product name
- Cosmetic 100ml Small Cylindrical PE Bottle – 20mm Neck
- Product code / SKU
- SJE1710-100
- Material
- PE PE material guide →
- Capacity
- 100 ml
- Weight
- 12 g Verified from the dimension drawing for this model.
- Neck
- 20 mm
- Closure
-
Screw capMist sprayerDropper cap
- Dimensions
-
Dimension drawing on file for this model. Body diameter, total height and neck finish are re-checked against a pre-production sample before mass production.
- Application
- skincare, serum and cosmetic formulas
- Decoration
-
Silk-screen printingPressure-sensitive labelsSoft-touch
- Tooling
- Stock mold — no tooling cost and no tooling lead time on this item. Private tooling is available: a new mold runs 30–45 days including mold making, and the mold fee, its ownership and any volume-based refund schedule are fixed in the contract before work starts. Stock mold vs custom moldTooling explained
- MOQ
- 5,000 pcs
- Sampling
- Stock samples are free of charge, freight collect. Custom-colour or printed samples carry a sampling fee that is deducted from the bulk order. Sampling runs 3–10 days depending on whether artwork or a colour match is involved. What to approve in a sample
- Lead time
- 12-18 days
- Quality system
- ISO 9001:2015 — certified. Quality & compliance →
A 100 ml PE small cylindrical bottle – neck, the SJE1710-100 is finished with a 20 mm (20 neck) neck and a consistent wall for reliable capping. Choose from stock colours or match to your own sample.
Design Features
- Precision 20 mm (20 neck) finish seats dropper, serum pump and screw caps without leakage under normal filling torque.
- PE stays squeezable and chemical-resistant, ideal for thicker daily-use formulas.
- Existing mold supports low-MOQ re-orders for seasonal and test runs.
- Decoration done in-house: silk-screen, hot-stamp and labelling applied before packing.
Material
PE (polyethylene) is squeezable, chemically resistant and well suited to thicker formulas and daily-use products. It is recyclable and can be supplied in natural, white or matched colour. Molded in-house under ISO 9001:2015.
Applications
Cap options for this bottle
Choose the right closure for your formula and dispensing style.
- ✓ Screw Cap, Dropper, Treatment Pump, Fine Mist Spray
Make it unmistakably yours
Available finishes:
- ✓ Soft Touch, Labeling, Silk Screen Printing, Silver/Gold Coating
Full customization available: private tooling, color matching (Pantone), silk screen printing (up to 6 colors), labeling, hot stamping, shrink sleeves, metallic coating. Pre-production samples within 7 days.
Decoration options
- ✓ Silk screen printing (up to 6 colors)
- ✓ Hot stamping (gold / silver)
- ✓ Pressure-sensitive labels (waterproof)
- ✓ Spray coating & soft-touch
- ✓ Private mold tooling (exclusive)
What we can put on paper
ISO 9001:2015 is the only standard Shijin is certified to. Everything else below is evidence we supply per order against the current document on file — we do not present test reports or audit reports as certifications.
Quality management system. Certificate and current scope statement available on request.
Third-party test reports supplied per order against the current report on file. These are test evidence, not a standard Shijin is certified to.
Where a product falls under an EU directive we supply the supporting declaration and test evidence per order. CE is a manufacturer declaration, not a certificate issued to Shijin.
MOQ, lead time & price
- • $0.15 – $0.35 / pc (depends on quantity & decoration)
Go deeper on this product
All customer projects →PE — properties, grades and limits
What PE is good at, where it fails, and which fills it should not be used with.
Read the PE guide →Neck and closure: 18mm, 20mm, 24/410 and 28/410
The neck finish decides which pumps, caps and sprayers fit. How to read a finish code and avoid a mismatch.
Open the guide →Germany personal care — HDPE body wash, four reorders
200–500 ml HDPE body wash with an in-mold handle: four reorders and 140,000+ units shipped since 2024.
Read the case →
Helpful guides & material tips
Shipping Bottles to the Middle East — Does the Heat Really Matter?
A plain-English guide for buyers importing bottles to the Gulf and wider Middle East: why a container turns...
How Many Different Bottles Can I Mix in One Shipping Container?
A plain-English guide for distributors and wholesalers: why a mixed container is priced per item and not per...
Travel-Size Bottles 30–100ml: TSA-Friendly PET for Kits
Each bottle must be 100 ml or less. Build a coherent kit with matched 24/410 necks and one...
Common questions
Every answer below is built from this model's own specification record and from Shijin's standard supply terms.
What material is this bottle made from?+
Cosmetic 100ml Small Cylindrical PE Bottle – 20mm Neck is molded in PE — flexible and impact-resistant. Material test reports for the resin grade are supplied per order against the current document on file.
What capacity options are available?+
This item is 100 ml. The Plastic Cosmetic Bottles family runs from 19 ml to 1000 ml across 38 sizes — including 19 ml, 20 ml, 30 ml, 40 ml, 45 ml, 50 ml, 60 ml, 80 ml. A capacity outside that range needs a private mold.
Can the bottle be customized?+
Yes. Full customization available: private tooling, color matching (Pantone), silk screen printing (up to 6 colors), labeling, hot stamping, shrink sleeves, metallic coating. Pre-production samples within 7 days. Colour options on this item: Soft Touch (any color), Frosted, Pearl, Clear, Custom Pantone.
Can I use a stock mold?+
Yes — this item is already molded in a stock mold, so there is no tooling cost and no tooling lead time. Shijin holds 2,000+ stock molds across PET, PE, HDPE and PETG. Colour, printing and labelling are all applied to a stock mold at no tooling cost; only a new bottle shape or a new capacity needs private tooling.
Can the closure be customized?+
The neck finish on this item is 20 mm. Closures we supply for it: Screw cap, Mist sprayer, Dropper cap. Closure colour, printing and material are all customisable, and an exclusive closure tool can be developed if nothing standard fits.
What decoration options are available?+
Silk-screen printing (up to 6 colours), hot stamping in gold and silver, pressure-sensitive labels, spray coating and soft-touch. Decoration recorded for this item: Silk-screen printing, Pressure-sensitive labels, Soft-touch.
What is the MOQ?+
MOQ is 5,000 pcs. Custom colours start at 10,000 pcs, so a 5,000 pc run ships in a stock colour with your printing applied. Mixed models can be combined towards the same tier.
What is the difference between SJE1710-100 (20mm neck) and SJE1705-100 (24mm neck)?+
Both are 100ml PE bottles but SJE1710-100 has a narrower 20mm neck suited for precision dispensers (droppers, fine mist), while SJE1705-100 has a 24mm neck for larger pumps (lotion pumps, treatment pumps).
Is 12g durable enough for shipping?+
Yes, despite its light weight, PE is impact-resistant and the cylindrical shape provides structural integrity. Our drop testing confirms survival from 1.2m onto concrete.
Can this bottle be produced in translucent/frosted material?+
Yes, frosted PE is available and creates a beautiful diffused effect that showcases product color while maintaining an elegant opaque appearance.
Important ordering notes
Specifications may vary by batch. All dimensions are confirmed against a physical pre-production sample before mass production runs. Certification details, pricing, and lead times are confirmed per purchase order. Contact engineering for exact specifications.
Want this bottle with your brand?
Send us your capacity, material and quantity — our engineering team replies within one business day with a quote and 3D-ready options.
Request a quote for this bottle
Send us your quantity and target market. Our engineering team replies within one business day with pricing, MOQ, lead time and a decoration recommendation.