Bath & Body 1000ml PE Bath Bottle for Bulk Refill & Family Size – 38mm Neck, 75g
Plastic Bath Bottles
1000ml PE Bath bottle for bulk refill & family size — 38mm neck, 75g, a disc-top cap for controlled, one-hand dispensing. OEM/ODM, MOQ 3,000 pcs, 25-day lead.
Recommended for Bulk Refill & Family Size – 38mm Neck, 75g. The PE construction is flexible and impact-resistant. Its large volume is built for shampoos, detergents and household-care formats.
Built to spec, ready to brand
Every dimension in the record below belongs to this model. Body diameter, total height and wall thickness are confirmed against a physical pre-production sample before mass production runs.
Share your formula and fill volume and we will advise the safest material and neck combination for it.
- Product name
- Bath & Body 1000ml PE Bath Bottle for Bulk Refill & Family Size – 38mm Neck, 75g
- Product code / SKU
- SJE1897-1000
- Material
- PE PE material guide →
- Capacity
- 1000 ml
- Weight
- 75 g Verified from the dimension drawing for this model.
- Neck
- 38 mm
- Closure
-
Disc-top cap
- Dimensions
- Issued as a dimension drawing with your quotation. Body diameter, total height and wall thickness are confirmed against a pre-production sample before tooling.
- Application
- bath, shower and body care
- Decoration
-
Matte / frosted
- Tooling
- Stock mold — no tooling cost and no tooling lead time on this item. Private tooling is available: a new mold runs 30–45 days including mold making, and the mold fee, its ownership and any volume-based refund schedule are fixed in the contract before work starts. Stock mold vs custom moldTooling explained
- MOQ
- 3,000 pcs
- Sampling
- Stock samples are free of charge, freight collect. Custom-colour or printed samples carry a sampling fee that is deducted from the bulk order. Sampling runs 3–10 days depending on whether artwork or a colour match is involved. What to approve in a sample
- Lead time
- 25 days
- Quality system
- ISO 9001:2015 — certified. Quality & compliance →
The SJE1897-1000 is a 1000 ml PE bath bottle built around a 38 mm neck — a clean, stable body shaped for premium bath and body lines. Stock tooling means short lead times and colour matched to your artwork.
Design Features
- Precision 38 mm finish seats wide lids and scoop caps without leakage under normal filling torque.
- PE stays squeezable and chemical-resistant, ideal for thicker daily-use formulas.
- Existing mold supports low-MOQ re-orders for seasonal and test runs.
- Decoration done in-house: silk-screen, hot-stamp and labelling applied before packing.
Material
PE (polyethylene) is squeezable, chemically resistant and well suited to thicker formulas and daily-use products. It is recyclable and can be supplied in natural, white or matched colour. Molded in-house under ISO 9001:2015.
Applications
Cap options for this bottle
Choose the right closure for your formula and dispensing style.
- ✓ a disc-top cap for controlled, one-hand dispensing
Make it unmistakably yours
Available finishes:
- ✓ Matte
We support full customization: private tooling, Pantone color matching, silk-screen printing (up to 6 colors), hot stamping, labeling, and metallic coating, with pre-production samples in 7 days. This version ships with a pre-printed body LOGO already on the bottle, ready for shelf.
Decoration options
- ✓ Silk screen printing (up to 6 colors)
- ✓ Hot stamping (gold / silver)
- ✓ Pressure-sensitive labels (waterproof)
- ✓ Spray coating & soft-touch
- ✓ Private mold tooling (exclusive)
What we can put on paper
ISO 9001:2015 is the only standard Shijin is certified to. Everything else below is evidence we supply per order against the current document on file — we do not present test reports or audit reports as certifications.
Quality management system. Certificate and current scope statement available on request.
Third-party social-compliance audit report supplied per order against the current document on file.
Third-party test reports supplied per order against the current report on file. These are test evidence, not a standard Shijin is certified to.
MOQ, lead time & price
- • $0.50 – $0.85
Go deeper on this product
All customer projects →PE — properties, grades and limits
What PE is good at, where it fails, and which fills it should not be used with.
Read the PE guide →Bottle design: capacity, diameter and wall thickness
How fill volume, headspace and wall thickness are fixed — and why a 500 ml body is engineered differently from a 100 ml one.
Open the guide →Germany personal care — HDPE body wash, four reorders
200–500 ml HDPE body wash with an in-mold handle: four reorders and 140,000+ units shipped since 2024.
Read the case →
Helpful guides & material tips
Which Printing or Labelling Survives E-commerce Handling Best?
A plain-English guide for marketplace sellers: why e-commerce is harder on a bottle's decoration than a retail shelf,...
Do Oil-Based Serums Need a Special Bottle or Inner Coating?
A plain-English guide for buyers with oil-based formulas: when a plain PET bottle is enough, when an inner...
Recycled PET (rPET) Bottles: Grades, Certificates and Color Limits
rPET bottles come in food-grade and non-food grades with GRS certificates; higher recycled loads tint the resin and...
Common questions
Every answer below is built from this model's own specification record and from Shijin's standard supply terms.
What material is this bottle made from?+
Bath & Body 1000ml PE Bath Bottle for Bulk Refill & Family Size – 38mm Neck, 75g is molded in PE — flexible and impact-resistant. Material test reports for the resin grade are supplied per order against the current document on file.
What capacity options are available?+
This item is 1000 ml. The Plastic Bath Bottles family runs from 400 ml to 1800 ml across 18 sizes — including 400 ml, 420 ml, 430 ml, 458 ml, 480 ml, 530 ml, 550 ml, 600 ml. A capacity outside that range needs a private mold.
Can the bottle be customized?+
Yes. We support full customization: private tooling, Pantone color matching, silk-screen printing (up to 6 colors), hot stamping, labeling, and metallic coating, with pre-production samples in 7 days. This version ships with a pre-printed body LOGO already on the bottle, ready for shelf. Colour options on this item: Custom Pantone.
Can I use a stock mold?+
Yes — this item is already molded in a stock mold, so there is no tooling cost and no tooling lead time. Shijin holds 2,000+ stock molds across PET, PE, HDPE and PETG. Colour, printing and labelling are all applied to a stock mold at no tooling cost; only a new bottle shape or a new capacity needs private tooling.
Can the closure be customized?+
The neck finish on this item is 38 mm. Closures we supply for it: Disc-top cap. Closure colour, printing and material are all customisable, and an exclusive closure tool can be developed if nothing standard fits.
What decoration options are available?+
Silk-screen printing (up to 6 colours), hot stamping in gold and silver, pressure-sensitive labels, spray coating and soft-touch. Decoration recorded for this item: Matte / frosted.
What is the MOQ?+
MOQ is 3,000 pcs. Custom colours start at 10,000 pcs, so a 5,000 pc run ships in a stock colour with your printing applied. Mixed models can be combined towards the same tier.
Important ordering notes
Specifications may vary by batch. All dimensions are confirmed against a physical pre-production sample before mass production runs. Certification details, pricing, and lead times are confirmed per purchase order. Contact engineering for exact specifications.
Want this bottle with your brand?
Send us your capacity, material and quantity — our engineering team replies within one business day with a quote and 3D-ready options.
Request a quote for this bottle
Send us your quantity and target market. Our engineering team replies within one business day with pricing, MOQ, lead time and a decoration recommendation.