Product Center · Pump Bottles

Lotion & Foam Pump Bottles

PET and HDPE bottles with lotion and foam pumps for skincare and cleaning.

Overview

Engineered for your formula, finished for your brand

Pump bottles provide controlled, repeatable dispensing for everything from hand soap and sanitizer to lotion and cleanser. We pair PET and HDPE bodies with lotion and foam pumps, validated for leak and drop resistance.

Capacity range: 50–1000 ml
Materials: PET / HDPE / PP
Closures: Lotion pump · foam pump · screw cap
Finishes: Solid color, pearl, matte, silk-screen
MOQ: From 5,000 pcs · 2,000+ stock molds
Typical use: Hand soap, sanitizer, lotion, cleanser

Request a Quote → Chat on WhatsApp

The pump is the product, not the accessory

A customer judges a pump bottle on the second and third use, long after the graphics have done their work. What they notice is dispensing consistency, whether the pump dribbles after release, and whether the collar loosens after a month in the bathroom. Those are closure engineering problems, and they are why we treat the pump as part of the package rather than a catalogue item bolted on at the end.

Every pump design we run is validated for air pressure retention and drop resistance before it goes into production, and we test the assembled bottle rather than the components in isolation. A pump that holds on the bench and leaks in a pallet is a specification gap, not bad luck.

The other half of the decision is matching pump output to viscosity. A formula that is too thick for the pump starves and sputters; too thin and it dribbles. Sampling with your actual product is the only reliable way to set this, which is why we ask for the formula early.

Foam pump or lotion pump — and how to choose

The two are not interchangeable. A foam pump aerates a low-viscosity formula through a mesh chamber, which is why it is standard for hand soap, facial cleansers and mousses — it turns a small volume of liquid into a satisfying amount of foam. A lotion pump moves a thicker product more or less as it is, which suits creams, conditioners and heavier serums.

The constraint on foam is the formula, not the pump. If the liquid is too viscous or not correctly diluted, the pump will produce a wet, collapsing foam no matter how good the hardware is. That is why we test foam pumps with your actual diluted product and tell you honestly when a formula needs adjusting.

Both types come in standard white, black and natural, with custom colours available at a higher minimum. Collar finish — smooth, ribbed or aluminium — has to be matched to the bottle neck, so it is worth deciding the bottle and the pump together rather than sequentially.

Specification, MOQ and what to send for a quote

To quote a pump bottle properly we need four things: the bottle size and material, the neck finish, the product viscosity, and whether you want foam or lotion output. Everything else — colour, collar, dip-tube length, output volume — can be settled during sampling. Missing the viscosity is the single most common reason a first sample disappoints.

Minimums are 5,000 pcs for white, black and natural pumps and 10,000 pcs for custom colours. With 2,000+ bottle molds already in the library, the usual path is a stock bottle plus a matched pump, which avoids tooling entirely and gets samples out in about 3–10 days.

Production runs on 30+ lines at up to 200,000 pcs per day, so volume is rarely the issue — what we need is your launch date and an indication of the follow-up order, because that is what determines whether we can hold capacity for you.

FAQ

Common questions about pump bottles

Are your pumps leak-tested?+

Yes — every design is validated at 0.6–0.8 MPa air pressure and a 1–1.2 m free-drop ×3 before shipping.

Foam or lotion pump?+

Foam pumps aerate the formula for hand soap and cleansers; lotion pumps suit creams and thicker fluids. We match the pump to your formula.

How do I know which pump output my formula needs?+

Send us the viscosity and we will match it. Output is specified in volume per stroke, and the practical test is whether the pump delivers a usable dose without sputtering or dribbling. A formula that is thicker than the pump is designed for will starve and pulse; one that is too thin will dribble after release. We sample with your actual product rather than a substitute, because viscosity at room temperature and viscosity in a cold bathroom are not the same number.

Can you match the pump collar to my bottle neck?+

Yes — collar finish has to be matched to the neck, and it is much easier to set while the bottle is still being specified than after the tool is cut. The common cosmetic neck finishes we work with are 18/410, 20/410, 24/410 and 28/410, each supporting a different range of collar styles including smooth, ribbed and aluminium. Tell us the neck finish and we will propose a pump that seats correctly and looks deliberate rather than adapted.

Are the pumps tested before shipment?+

Yes. Each design is validated for pressure retention and drop resistance before it enters production, and we test the assembled bottle rather than the pump on its own — because what fails in transit is the closure system, not the component. If your distribution involves long hot container shipments, tell us: that changes what we test for and how we specify the liner.