300ml HDPE Cosmetic Bottle
Plastic Cosmetic Bottles
300 ml PE (HDPE) cosmetic bottle with a 24mm neck, in-house molded for leak-free closures. Stock mold, custom color and silk-screen available.
The PE construction is flexible and impact-resistant. Its mid-range volume fits everyday skincare and personal-care routines.
Built to spec, ready to brand
Every dimension in the record below belongs to this model. Body diameter, total height and wall thickness are confirmed against a physical pre-production sample before mass production runs.
Share your formula and fill volume and we will advise the safest material and neck combination for it.
- Product name
- 300ml HDPE Cosmetic Bottle
- Product code / SKU
- SJE1804-300
- Material
- PE PE material guide →
- Capacity
- 300 ml
- Neck
- 24 mm
- Closure
-
Screw capDisc-top cap
- Dimensions
- Issued as a dimension drawing with your quotation. Body diameter, total height and wall thickness are confirmed against a pre-production sample before tooling.
- Application
- skincare, serum and cosmetic formulas
- Decoration
-
Soft-touchMatte / frostedPearl finish
- Tooling
- Stock mold — no tooling cost and no tooling lead time on this item. Private tooling is available: a new mold runs 30–45 days including mold making, and the mold fee, its ownership and any volume-based refund schedule are fixed in the contract before work starts. Stock mold vs custom moldTooling explained
- MOQ
- 5,000 pcs (stock) / 10,000 pcs (custom color)
- Sampling
- Stock samples are free of charge, freight collect. Custom-colour or printed samples carry a sampling fee that is deducted from the bulk order. Sampling runs 3–10 days depending on whether artwork or a colour match is involved. What to approve in a sample
- Lead time
- 15-20 days
- Quality system
- ISO 9001:2015 — certified. Quality & compliance →
The SJE1804-300 is a 300 ml PE cosmetic bottle built around a 24 mm neck — a clean, stable body shaped for premium premium retail lines. Stock tooling means short lead times and colour matched to your artwork.
Design Features
- Precision 24 mm finish seats lotion pumps, screw caps and disc-tops without leakage under normal filling torque.
- PE stays squeezable and chemical-resistant, ideal for thicker daily-use formulas.
- Stock tooling keeps lead times short and re-orders simple.
- Decoration done in-house: silk-screen, hot-stamp and labelling applied before packing.
Material
PE (polyethylene) is squeezable, chemically resistant and well suited to thicker formulas and daily-use products. It is recyclable and can be supplied in natural, white or matched colour. Molded in-house under ISO 9001:2015.
Applications
Cap options for this bottle
Choose the right closure for your formula and dispensing style.
- ✓ Screw cap / flip cap / disc-top
Make it unmistakably yours
Available finishes:
- ✓ Matte / pearl / frosted / soft-touch
Private mold available. Silk screen up to 6 colors, hot stamping, labeling, spray coating, soft-touch. Neck and weight are typical values; confirm with the size chart before mass production.
Decoration options
- ✓ Silk screen printing (up to 6 colors)
- ✓ Hot stamping (gold / silver)
- ✓ Pressure-sensitive labels (waterproof)
- ✓ Spray coating & soft-touch
- ✓ Private mold tooling (exclusive)
What we can put on paper
ISO 9001:2015 is the only standard Shijin is certified to. Everything else below is evidence we supply per order against the current document on file — we do not present test reports or audit reports as certifications.
Quality management system. Certificate and current scope statement available on request.
Shijin does not hold GRS. Where recycled content is required we supply recycled-content supply-chain records for the resin instead.
MOQ, lead time & price
- • USD 0.18-0.32 / pc
Go deeper on this product
All customer projects →PE — properties, grades and limits
What PE is good at, where it fails, and which fills it should not be used with.
Read the PE guide →Neck and closure: 18mm, 20mm, 24/410 and 28/410
The neck finish decides which pumps, caps and sprayers fit. How to read a finish code and avoid a mismatch.
Open the guide →Germany personal care — HDPE body wash, four reorders
200–500 ml HDPE body wash with an in-mold handle: four reorders and 140,000+ units shipped since 2024.
Read the case →
Helpful guides & material tips
Which Printing or Labelling Survives E-commerce Handling Best?
A plain-English guide for marketplace sellers: why e-commerce is harder on a bottle's decoration than a retail shelf,...
Do Oil-Based Serums Need a Special Bottle or Inner Coating?
A plain-English guide for buyers with oil-based formulas: when a plain PET bottle is enough, when an inner...
Recycled PET (rPET) Bottles: Grades, Certificates and Color Limits
rPET bottles come in food-grade and non-food grades with GRS certificates; higher recycled loads tint the resin and...
Common questions
Every answer below is built from this model's own specification record and from Shijin's standard supply terms.
What material is this bottle made from?+
300ml HDPE Cosmetic Bottle is molded in PE — flexible and impact-resistant. Material test reports for the resin grade are supplied per order against the current document on file.
What capacity options are available?+
This item is 300 ml. The Plastic Cosmetic Bottles family runs from 19 ml to 1000 ml across 38 sizes — including 19 ml, 20 ml, 30 ml, 40 ml, 45 ml, 50 ml, 60 ml, 80 ml. A capacity outside that range needs a private mold.
Can the bottle be customized?+
Yes. Private mold available. Silk screen up to 6 colors, hot stamping, labeling, spray coating, soft-touch. Neck and weight are typical values; confirm with the size chart before mass production. Colour options on this item: White / natural / custom Pantone.
Can I use a stock mold?+
Yes — this item is already molded in a stock mold, so there is no tooling cost and no tooling lead time. Shijin holds 2,000+ stock molds across PET, PE, HDPE and PETG. Colour, printing and labelling are all applied to a stock mold at no tooling cost; only a new bottle shape or a new capacity needs private tooling.
Can the closure be customized?+
The neck finish on this item is 24 mm. Closures we supply for it: Screw cap, Disc-top cap. Closure colour, printing and material are all customisable, and an exclusive closure tool can be developed if nothing standard fits.
What decoration options are available?+
Silk-screen printing (up to 6 colours), hot stamping in gold and silver, pressure-sensitive labels, spray coating and soft-touch. Decoration recorded for this item: Soft-touch, Matte / frosted, Pearl finish.
What is the MOQ?+
MOQ is 5,000 pcs (stock) / 10,000 pcs (custom color). Mixed models can be combined towards the same tier.
Can you match my Pantone color?+
Yes - we color in-house and confirm with a physical sample.
How long is the lead time?+
15-20 days after sample approval.
Important ordering notes
Specifications may vary by batch. All dimensions are confirmed against a physical pre-production sample before mass production runs. Certification details, pricing, and lead times are confirmed per purchase order. Contact engineering for exact specifications.
Want this bottle with your brand?
Send us your capacity, material and quantity — our engineering team replies within one business day with a quote and 3D-ready options.
Request a quote for this bottle
Send us your quantity and target market. Our engineering team replies within one business day with pricing, MOQ, lead time and a decoration recommendation.